Canon PowerShot ELPH 100 HS First Look

by Reads (11)

The PowerShot ELPH 100 HS is one member of a fleet of three new digital ELPH point-and-shoots introduced earlier this year. We reviewed its 300 and 500 HS siblings, each sporting step-up features such a touch screen (the 500) and a 5x optical zoom lens (the 300). Our electric blue 100 HS review unit is slimmer, more pocketable and offers streamlined features for just around $200 at the time of this writing.

Canon PowerShot 100 HS

While the ELPH 500 offers more enthusiast-oriented features like an f/2 lens and semi-manual shooting modes, the 100 HS is all auto simplicity. It carries the same 12.1 megapixel CMOS sensor as the 300 HS, optimized for better low light performance by positioning some of the chip’s circuitry out of the way of light-catching photosites. Canon claims on its website that the HS system “Takes the frustration out of low light shooting.”

Canon PowerShot 100 HS

That’s all nice marketing speak, and so far the ELPH 300 and 500 have shown good performance at ISO 400 and beyond. None of these cameras are the low-light whisperers that Canon makes them out to be, but an improvement of even just an ISO stop is very encouraging.

The PowerShot 100 looks, feels and (so far) performs like a pared-down version of its higher-spec siblings. The last camera I reviewed was the 500 HS and it was noticeably larger than the skinny 100 HS. The bigger, wider lens on board the 500 is likely what made it so bulky, and it’s not a bad tradeoff if you can live with a somewhat larger camera. However, the 100 strikes a nice, clean profile, albeit with a slower lens.

Canon PowerShot 100 HS

It’s not all bad news lens-wise, the PowerShot 100 packs a 4x optical zoom lens starting at a nice 28mm with a maximum wide angle aperture of f/2.8. That lens will focus as close as 1.2 inches in macro mode. On the back of the camera is a 3.0-inch LCD with an average-ish resolution of 230k-dots.

Canon PowerShot 100 HS

Here’s a surprising new development I stumbled upon when I first started playing with the camera controls – pressing the playback button when the camera is off will turn it on and immediately begin displaying images. The playback button is neatly recessed into the back camera panel, and I’ll be keeping an eye on this feature as I work on the full review to see if it creates any unwanted power-ups and battery drains.



Pages: 1 2

LEAVE A COMMENT

0 Comments

|
All content posted on TechnologyGuide is granted to TechnologyGuide with electronic publishing rights in perpetuity, as all content posted on this site becomes a part of the community.